AH303A PCIe SC44Ge SAS Host Bus Adapter for Integrity Servers Support Guide, September 2009

Configuration Utility Screens
SAS BIOS configuration utility screens contain the following areas, starting at the top of the
screen:
• Header area: Identifies the utility and version number.
• Menu area: Gives the title of the current screen, and on screens other than the Adapter List
screen also identifies the adapter.
• Main area: The main area for presenting data. This area has a cursor for item selection, and
horizontal and vertical scroll bars if necessary.
• Footer area: Provides general help text, and lists the available key commands.
Adapter List Screen
When you start drvcfg, the Adapter List appears:
The Adapter List screen displays a scrolling list of up to 256 SAS controllers in the system, and
provides information about each of them.
Use the arrow keys to select a SAS controller, and then press Enter to view and modify the
selected SAS controller's properties.
The status of each adapter may be Enabled or Disabled. You can view and modify the SAS
controller settings for adapters in either status. Use the Boot Support setting in the Adapter
Properties screen to change the status of this setting. The EFI Driver must reconnect for a new
Boot Support setting to take effect; this occurs automatically when you exit drvcfg.
The information fields on the Adapter List Screen are as follows:
Adapter Indicates the specific SAS Host Bus Adapter type.
PCI Bus Indicates the PCI Bus number assigned by the system BIOS to an adapter (0x00
- 0xFF, 0 - 255 decimal)
PCI Dev Indicates the PCI Device assigned by the system BIOS to an adapter (range
0x00 - 0x1F, 0 - 31 decimal)
PCI Fnc Indicates the PCI Function assigned by the system BIOS to an adapter (range
0x00 - 0x7, 0 - 7 decimal)
FW Revision Displays the Fusion MPT firmware version and type (IR or IT)
20 Configuring the Adapter Offline