AH303A PCIe SC44Ge SAS Host Bus Adapter for Integrity Servers Support Guide, September 2009

Status Indicates whether the adapter is eligible for software control: Enabled,
Disabled, or Error.
Enabled Indicates the EFI driver is controlling the adapter or will attempt
to control the adapter upon reload.
Disabled Indicates the EFI driver is not controlling the adapter or will
discontinue control of the adapter upon reload.
Error Indicates that the EFI driver encountered a problem with the
adapter. You can view and modify settings for the adapter but
the available information and functionality may be limited.
Adapter Properties Screen
After you select a SAS controller and press Enter, drvcfg scans the SAS controller and its
attached devices, and the Adapter Properties screen (similar to the following) appears. Use this
screen to view and modify adapter settings.
The information fields on the Adapter Properties screen are as follows:
Adapter Indicates the specific SAS Host Bus Adapter type.
PCI Address Displays the PCI address assigned by the system BIOS to the
adapter.
• Bus value range 0x00 - 0xFF, 0 - 255 decimal
• Device value range 0x00 - 0x1F, 0 - 31 decimal
• Function range 0x00 - 0x7, 0 - 7 decimal
MPT Firmware Revision Displays the MPT firmware version and type in the format
x.xx.xx.xx-yy, where x.xx.xx.xx indicates the firmware
version and yy indicates the type. In the example screen the
firmware version is 1.23.33.00 and the type is IR.
SAS Address Displays the SAS Address assigned to this adapter.
Status Indicates whether the adapter is eligible for configuration utility
software control or is reserved for control by other software:
Enabled, Disabled, or Error.
The drvcfg Configuration Utility 21