AH303A PCIe SC44Ge SAS Host Bus Adapter for Integrity Servers Support Guide, September 2009

NOTE: Separate the program name, controller number, command, and parameters fields with
the ASCII space character. The format of the parameters is command specific. The program return
value is returned to the user when the program exits. If the command is successful a value of 0
is returned, otherwise, a value of 1 is returned.
The cfggen Command Set
DELETE
Use the DELETE command to set the controller configuration to factory defaults.
Syntax
cfggen <controller #> delete [noprompt]
Parameters
<controller #> A SAS controller number between 0 and 255. See ““LIST” (page 41).”
[noprompt] Eliminates warnings and prompts.
Operation
After you enter the DELETE command, you are prompted to proceed with the command. Answer
“yes” to proceed.
DISPLAY
Use the DISPLAY command to view information about the following controller configurations:
controller type, firmware version, BIOS version, volume information, and physical drive
information.
Syntax
cfggen <controller #> display [filename]
Parameters
<controller #> A SAS controller number between 0 and 255. See ““LIST” (page 41).”
[filename] A valid filename to store output of command to a file.
Sample Output
fs0:\EFI30305> cfggen 1 display
LSI Logic SAS Raid Configuration Utility v1.00.13.00
Read configuration has been initiated for controller 1
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS1068E
EFI BSD version : 3.03.05.00
Firmware version : 1.23.33.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 112
Maximum physical devices : 62
Concurrent commands supported : 163
Slot : Unknown
Bus : 3
Device : 0
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
The cfggen Utility 35