AH303A PCIe SC44Ge SAS Host Bus Adapter for Integrity Servers Support Guide, September 2009

No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 1
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 2
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 3
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 4
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 5
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 6
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Statistics for PHY ID : 7
No. of Invalid Dwords : 0
No. of Running Parity Errors : 0
No. of Loss Dword Syncs : 0
No. of PHY Reset Problems encountered : 0
Updating Enclosure Firmware
To download new firmware to an HP StorageWorks MSA60 or MSA70 storage enclosure online,
use this command:
sasmgr download -D /dev/sasdX -q ctrl=<MSA_controller_dsf> -q
downloadfile=<fw_image>
Where:
sasdX
The device file for the SAS controller
<MSA_controller_dsf>
The DSF for the MSA60 or MSA70 enclosure
<fw_image>
The firmware image file to download
Use ioscan to determine the DSF of the enclosure. See “Displaying Interface and Disk Information”
(page 44). The enclosure class in the ioscan output is ctl. The Description column indicates
the enclosure model; for example “MSA60” or “MSA70.”
56 Configuring and Troubleshooting the Adapter Online