HP Performance Optimized Datacenter 20c User Guide - China

Environmental control system 56
Setting the HP POD 20c serial number
If multiple HP POD 20c units are connected to the same facility BMS, enter each HP POD 20c serial number
to monitor and display each HP POD 20c ECS independently through the facility BMS.
To set the HP POD 20c serial number in the ECS:
1. Select POD S/N.
A keypad appears.
2. Enter the HP POD 20c serial number. For more information, see "Parts and part number identification
(on page 8)."
3. Select Save to store the new parameters in the system configuration file.
Controller Settings screen
You can only access this screen after you have entered a service-level password.