HP Performance-Optimized Datacenter, 6 m (20 ft) User Guide

Component identification 8
Component identification
HP POD components
HP POD external components
Item Component Description
1 Rear entrance doors Enable access to the rear of the rack-mounted components
2 Fan units Circulate the cool air throughout the HP POD
3 Heat exchangers Use chilled water to cool the air
4 Electrical busway end feeds
Provide main source of power distribution throughout the HP
POD
5 Front entrance door Enables access to the front of the rack-mounted components
6 Drain lines*
Collect water from the drain pans and removes it from the
HP POD
7 Emergency exit door Enables exit from the inside of the HP POD
*An additional drain is located on the rear of the HP POD to drain the condensate that may form on the heat
exchanger.
Rack components
The HP POD has 10 IT configured racks. The following diagram is an example of a fully loaded and
configured rack. Your rack might include different servers and components.