Manualshelf

HP Performance Optimized Datacenter (POD) 20c Site Preparation and Requirements Guide - China

ManualsBrandsHP ManualsComputer AccessoriesHP Performance Optimized Data Center (POD) 20ft
12345678910
Overview 5
Overview
About this document
This document outlines the site and preparation requirements for a 6 m (20 ft) HP POD 20c as it is being
released in China. The customer must provide a qualified architectural or consulting engineering team to
generate site-specific documents for each HP POD 20c installation, including final site drawings. The
customer site installation design must comply with all national, regional, and local regulations, ordinances,
codes, and the specifications listed in this document.
Safety information
The HP POD 20c is not suitable for long term personnel occupancy.
The HP POD 20c provides service access areas for periodic maintenance and service and is only to be used
by owner authorized personnel specifically trained in the maintenance and service of the HP POD 20c.
IMPORTANT: Before installing the HP POD 20c, consult your local AHJ for applicable codes and
to review site-specific location guidelines. If needed, obtain any necessary permits.
Site assessment
HP requires a detailed site assessment prior to planning and preparing the customer site location for the HP
POD 20c. Consult with HP to schedule a site assessment.
Site preparation
Site preparation must be complete prior to the POD delivery to ensure a timely installation and
commissioning. The site must meet all pad, power, and chilled water requirements.
Site safety and security
Each customer site must have its own standard safety and security requirements. The HP Program Managers
work with the customer to ensure adherence to the appropriate precautions. HP is not responsible for
determining or enforcing safety or security requirements. The customer must conduct all health and safety
evaluations of the HP POD 20c, only using HP as a support mechanism.
Fire suppression
The fire suppression system, supplied as an optional component of the HP POD 20c, is a "Manufacturer
Designed" system specifically for this HP product, in compliance with national standards.