HP Performance-Optimized Datacenter Maintenance and Service Guide

Removal and replacement procedures 20
WARNING: Use caution when removing and replacing the busway drop box. The drop box
weighs approximately 9 kg (20 lb).
5. Rotate the busway drop box 90 degrees so that it is parallel to the electrical busway, and then
remove it from the electrical busway (3).
Replacing the busway drop box
WARNING: Use caution when removing and replacing the busway drop box. The drop box
weighs approximately 9 kg (20 lb).
1. Insert the drop box into the electrical busway, and then rotate the drop box 90 degrees until it locks
into place (1).
2. Slide the hardware bracket to the left along the busway until it connects to the drop box (2).