HP Performance Optimized Datacenter 240e North America (Adiabatic) Maintenance and Service Guide

Removal and replacement procedures 32
3.
Remove the 10mm bolt that secures the actuator assembly to the exhaust fan damper (2), and then
remove the actuator assembly (3).
4. Remove the 10mm bolts securing the exhaust fan damper to the exhaust fan (1), and then remove the
exhaust fan (2).
Replacing the exhaust fan damper
1. Insert the new exhaust fan damper onto the metal frame, and then secure the exhaust fan damper with
the 10mm screws.
2. Replace the actuator assembly.
3. Replace the exhaust fan damper guard.