HP Photosmart 430 series digital camera with HP instant share - (English) User Manual

16 hp photosmart 430 series user’s manual
Turning on power
Turn the camera on by sliding the
lens cover/power switch open so
that the camera lens is exposed.
The Memory/USB light will blink
while the camera is turning on,
and the Image Display will turn
on to Live View mode when the camera is ready to use.
Restoring previous settings
When you change settings in the camera, some of them remain
set and some return to their default value when the camera is
turned off. For a complete list of which settings do what, see
Remembered and default camera settings on page 97.
If you want to turn the camera on with all of the settings that
were in effect when the camera was last turned off, hold down
the OK button when you turn on the camera
Choosing the language
The first time you turn the camera on, the following screen
appears and prompts you to choose a language.
1 Scroll to the language that you
want by using the buttons.
2 Press the OK button to select the
highlighted language.
NOTE If you need to go back and
change this setting later, you can do this in the Setup
menu. See Chapter 6: Using the setup menu on page 57.