HP Photosmart 430 series digital camera with HP instant share - (English) User Manual
Table Of Contents
- Trademark and copyright information
- Chapter 1: Getting started
- Chapter 2: Taking pictures and recording video clips
- Chapter 3: Reviewing images and video clips
- Chapter 4: Using hp instant share
- Chapter 5: Unloading, printing, and displaying images
- Chapter 6: Using the setup menu
- Chapter 7: Troubleshooting and support
- Appendix A: Batteries and camera accessories
- Appendix B: Specifications
Chapter 5: Unloading, printing, and displaying images 51
Chapter 5:
Unloading, printing, and
displaying images
Once you have taken pictures, you can unload them from your
camera to a computer, print them directly to a printer, or
display them on a television.
Unloading to a computer
NOTE If you are using the HP 8886 camera dock to do this
task, see the HP 8886 Camera Dock User’s Manual.
NOTE If you are using a Macintosh computer, you must first
change the USB configuration setting to Disk Drive in the
Setup menu. See USB configuration on page 59.
1 Your camera came with a
special USB cable for
connecting the camera to a
computer. Connect the
larger end of that USB
cable to the computer.
2 Open the rubber door on
the side of the camera and
connect the small end of
the USB cable to the USB
connector on the camera.