HP Photosmart 7700 series - (English) Setup Guide

1
2
3
HP #57
HP #58
Q3015-90155
hp photosmart
7700 series
setup
guide
unpack your printer
Note: Purchase a USB cable separately.
See the HP Photosmart Basics Guide for a
description of the items included with your
printer.
plug in the power cord
load plain paper in the in tray
1. Lift the paper catch.
2. Pull out the paper length guide on the In tray
and slide the paper width guide as far to the left
as it will go.
3. Place a stack of plain paper in the In tray.
4. Adjust the paper width guide and paper length
guide to fit close to the edges of the paper
without bending the paper.
5. Lower the paper catch.
6. Make sure that the photo tray slider is pulled
forward (toward you). This disengages the photo
tray.
Note: Store photo paper in the resealable storage
bag provided.
4
select your language
1. Press the ON button to turn on the printer.
A list of languages appears on the
printer’s LCD screen.
2. Press the SELECT PHOTOSbutton to
highlight your language, and then press
the OK button.
3. Press the SELECT PHOTOSbutton to
highlight Yes to confirm your language
selection, and then press the OK button.
A list of countries and regions appears on
the printer’s LCD screen.
4. Press the SELECT PHOTOSbutton to
highlight your country or region, and then
press the OK button.
Paper length guide
Paper catch
Paper width guide
Photo tray slider
In tray
Select Photos button
OK button
On button
*Q3015-90155*
Windows PC: Do not connect the printer to
your computer with the USB cable until
prompted by the installation software.
Macintosh: Do not connect the printer to
your computer with the USB cable until the
software installation has finished.