Setup Guide

HP Photosmart D7400 series
2
1
USB 802.11 Ethernet
/HP Photosmart série D7400
Retirez le ruban adhésif, les languettes et le lm
protecteur du couvercle, ainsi que de l’avant et de
l’arrière du périphérique.
Soulevez l’écran tactile et retirez le lm protecteur.
Vous pouvez positionner l’écran pour améliorer
l’af chage.
a.
b.
A l’attention des utilisateurs de câble
USB : ne connectez pas le câble USB
avant la section A2 .
Commencez ici
A l’attention des utilisateurs de réseau câblé ou sans
l : suivez les instructions du guide de con guration
pour ajouter HP Photosmart sur votre réseau.
Usuarios de cable USB : no conecte el
cable USB hasta la sección A2 .
Retire las cintas, las lengüetas y la película
protectora de la tapa, así como de la parte
anterior y posterior del dispositivo.
Levante la pantalla táctil y retire la cinta protectora.
Regule el ángulo de inclinación de la pantalla
hasta obtener una visión óptima.
a.
b.
Comience aquí
Usuarios de red cableada o inalámbrica : siga las
instrucciones de la Guía de instalación para cargar
correctamente el dispositivo HP Photosmart en la red.
USB cable users : Do not connect the USB
cable until Section A2 .
Start Here
Remove all tape, tabs, and protective lm from the
lid and from the front and back of the device.
Lift the touchscreen display and remove the
protective lm. You can adjust the angle of the
display to a position suitable for viewing.
a.
b.
Wireless or wired network users : you must follow
the instructions in this Setup Guide to be successful
adding the HP Photosmart to your network.
a
b
EN
ES
FR
EN
ES
FR
ES
FR
EN
EN
ES
FR

Summary of content (24 pages)