Quick Start Guide

2
Setting up your
camera
Install the batteries
1. Open the Battery/Memory card door
by sliding the door latch as indicated
on the Battery/Memory card door.
2. Insert the batteries.
3. Close the Battery/Memory card
door.
Note Turn the camera off before
removing the batteries. If using
rechargeable NiMH batteries, fully charge the batteries
before using them the first time.
Camera usage and battery type will affect
battery life. Alkaline batteries provide far less
battery life than either Photo Lithium or NiMH
batteries. For complete information, see Appendix A in
the electronic User Guide.
Number of shots
Battery
type
Minimum Maximum Average CIPA
Alkaline 80 160 120 110
NiMH 140 230 200 200
Photo
Lithium
300 600 375 375
8 HP Photosmart E427 Digital Camera
English