HP Photosmart M305/M307 digital camera with HP Instant Share - User's Manual

Chapter 6: Using the Setup Menu 83
USB Configuration
This setting determines how the camera is recognized when
connected to a computer.
1 In the Setup Menu (page 79),
select USB.
2 In the USB Configuration
sub-menu, highlight one of these
two choices:
• Digital Camera—Causes the
computer to recognize the
camera as a digital camera using the Picture Transfer
Protocol (PTP) standard. This is the default setting on
the camera.
• Disk Drive—Causes the computer to recognize the
camera as a disk drive using the Mass Storage Device
Class (MSDC) standard. Use this setting to transfer
images to a computer that does not have the HP Image
Zone software installed on it (see Transferring Images to
a Computer without HP Image Zone Software on
page 90). This setting may be unavailable with a
Windows 98 computer that does not have the HP Image
Zone software installed on it.
3 Press Menu/OK to save the setting and return to the
Setup Menu.
The new setting remains in effect until it is changed again, even
when you turn the camera off.