User Guide
Table Of Contents
- Contents
- HP Photosmart Premium Fax C410 series Help
- How do I?
- Finish setting up the HP Photosmart
- Get to know the HP Photosmart
- Scan
- Copy
- Fax
- Save photos
- Work with cartridges
- Solve a problem
- HP support
- Setup troubleshooting
- Improve print quality
- Print troubleshooting
- Memory card troubleshooting
- Scan troubleshooting
- Copy troubleshooting
- Fax troubleshooting
- The product is having problems sending and receiving faxes
- The product cannot send faxes, but can receive faxes
- The product is having problems sending a manual fax
- Pages of a fax I sent are missing
- The quality of the fax I sent is poor
- Fax transmission is slow
- Fax tones are recorded on my answering machine
- The product cannot receive faxes, but can send faxes
- The product is having problems receiving a manual fax
- The product is not answering incoming fax calls
- Pages of a fax I received are missing
- Faxes are received but do not print
- Parts of a fax I received are cut off
- I hear static on my telephone line since connecting the product
- The fax test failed
- I am having problems faxing over the Internet using IP phone
- Errors
- Technical information
- Notice
- Cartridge chip information
- Specifications
- Environmental product stewardship program
- Eco-Tips
- Paper use
- Plastics
- Material safety data sheets
- Recycling program
- HP inkjet supplies recycling program
- Power consumption
- Disposal of waste equipment by users in private households in the European Union
- Chemical Substances
- Toxic and hazardous substance table
- Battery disposal in the Netherlands
- Battery disposal in Taiwan
- Attention California users
- EU battery directive
- Regulatory notices
- Regulatory wireless statements
- Regulatory telecommunication notices
- Japan safety statement
- Index
To disable the usage information function
1. Press Setup.
2. Press the down arrow button until Preferences is highlighted, and then press OK.
3. Press the down arrow button until Cartridge Chip Info is highlighted, and then press OK.
NOTE: To re-enable the usage information function, restore the factory defaults.
NOTE: You can continue to use the cartridge in the HP product if you turn off the memory chip's
ability to collect the product's usage information.
Specifications
Technical specifications for the HP Photosmart are provided in this section. For complete product
specifications, see the Product Data Sheet at
www.hp.com/support.
System requirements
Software and system requirements are located in the Readme file.
For information about future operating system releases and support, visit the HP online support Web
site at
www.hp.com/support.
Environmental specifications
• Recommended operating temperature range: 15 ºC to 32 ºC (59 ºF to 90 ºF)
• Allowable operating temperature range: 5 ºC to 40 ºC (41 ºF to 104 ºF)
• Humidity: 15% to 80% RH non-condensing; 28 ºC maximum dewpoint
• Non-operating (Storage) temperature range: –40 ºC to 60 ºC (–40 ºF to 140 ºF)
• In the presence of high electromagnetic fields, it is possible the output from the HP Photosmart
may be slightly distorted
• HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields
Paper specifications
Type
Paper weight Input tray
*
Output tray
†
Photo tray
*
Document
feeder tray
Plain paper 20 to 24 lb. (75
to 90 gsm)
Up to 125 (20 lb.
paper)
50 (20 lb.
paper)
n/a Up to 50
Legal paper 20 to 24 lb. (75
to 90 gsm)
Up to 100 (20 lb.
paper)
10 (20 lb.
paper)
n/a Up to 50
Cards 110 lb. index
max (200 gsm)
Up to 20 25 Up to 20 n/a
Envelopes 20 to 24 lb. (75
to 90 gsm)
Up to 15 15 n/a n/a
Transparency film n/a Up to 40 25 n/a n/a
Labels n/a Up to 40 25 n/a n/a
Chapter 14
238 Technical information
Technical information