getting started Guide for ExecutiveAssistant

3Com ExecutiveAssistant Getting Started Guide 27
Figure 28 - Add/Modify Extensions
34. Do not add any other addition extensions at this time otherwise you will need to
reboot the computer before you can proceed with the Configuration Wizard. Click
OK button to continue.
Figure 29 - NBX TSP Configuration
35. Do not reboot at this time. Usually, you will need to reboot when you receive this
message but you will first want to try to finish the Media Driver Configuration
wizard in this case. Click OK button to continue.
Figure 30 - NBX TAPI Reboot
36. Enter your Media Driver port extension where it is asking you to enter the wave
phone device "extension" number as shown in Figure 31. This documentation has
been using the example extension of 300, but you will enter the extension that
matches your first Media Driver port extension. This extension should be the
same extension that was entered on the prior page showing the NBX TSP
Configuration. Click Next button to continue.