getting started Guide for ExecutiveAssistant

3Com ExecutiveAssistant Getting Started Guide 49
pre-translator (“EA Internal Ext-to-Ext”) has been created and three user extensions
(1000, 1002, 1004) have been added to it.
Note: Do not change the default NBX pre-translator table. The NBX system will not
function properly if the default table is changed.
4. Add PreTranslatorOperation lines to dial plan to route calls from the extensions
you wish to have calls recorded for, routing them to the hunt group for the
ExecutiveAssistant Auto-Attendant, as shown in the screenshot below. (In this
example, the hunt group is 4001.)
6. Click the Apply button to save these changes to your NBX system dial plan.
7. Click the OK button in the confirmation dialog box that appears. The NBX system
will import and test the new dial plan and the Import Results screen will appear.
8. Select Dial Plan > Pretranslators. In the Pretranslators screen, select the new pre-
translator you just created. (In this example, “EA Internal Ext-to-Ext”).
9. In the Devices Using screen that appears, select the extensions that you added to the
dial plan.