8/10.7 dBi Dual-Band Narrow Beamwidth 3-Element MIMO Sector Antenna (J9169A) Guide v5.5.1

Item Specication
Frequency, GHz 2.4-2.5 & 5.1-5.9
Gain with 34” cable (dBi) 8.0 @ 2.4-2.5 GHz, 10.7 @ 5.1-5.9 GHz
VSWR Maximum 2.0:1
3 dB Beamwidth - Azimuth 75° @ 2.45 GHz / 55° @ 5.5 GHz
3 dB Beamwidth - Elevation 70° @ 2.45 GHz / 60° @ 5.5 GHz
Polarization Linear, 2 Vertical, 1 Horizontal
Maximum Input Power 1 Watt
Cable Length 34 in. (860 mm) Plenum rated
Mechanical Size
10.2” x 10.2” x 1.3”
(259.1 x 259.1 x 33.5 mm)
Weight 3.96 lb. (1.8 kg)
Antenna Connection Type N (male) connector (3x)
Radome Polycarbonate
Mount Style Articulating for Mast / Wall
Operating Temperature -30°C to +65°C
Wind Surface Area @ 0°, 0.0067 m
2
/ @ 90°, 0.009 m
2
Wind Survival 200 km/h
Water / Dust Seal Rating IP67
SAFETY
The HP J9169A and all associated equipment should be installed in
accordance with applicable local and national electrical code guidelines
to ensure safe operation.
Before connecting an outdoor antenna to an HP Wireless Access Point,
be sure that the access point radio power levels are set in accordance
with local regulatory requirements. For information on setting radio
power levels, see Transmit power control in the MSM3xx/4xx Access
Points Management and Conguration Guide .
For mandatory antenna power settings by country/region, look for
Antenna Power-Level Setting Guide (for MSM products) at
www.hp.com/networking/support.
Please read all instructions carefully before attempting to
install and use this product.
DESCRIPTION
The HP J9169A is a dual-band, narrow beamwidth directional sector
antenna for use in 802.11n MIMO applications. Enclosed in a compact,
low-prole radome, the antenna is mounted to a rugged, articulating
mount. The mount can be afxed to a mast or anchored to a wall.
Each of the three MIMO antenna elements are connected to the access
point via low-loss, plenum-rated coaxial pigtails. The radiation patterns
are uniform and symmetrical, providing high-level signal density into
dened coverage zones.
This antenna will greatly enhance the performance of 802.11n systems.
The dual-band frequency coverage means that a single antenna can be
deployed with any MIMO radio in the 2.4-2.5 GHz or 5.1-5.9 GHz bands.
ANTENNA PORTS
Antenna cable port identifaction and polarization is as follows:
• Port 1 (Blue), vertically polarized
• Port 2 (Red), vertically polarized
• Port 3 (Green), horizontally polarized
Respect color coding when connecting to the access point (AP).
SPECIFICATIONS
WARRANTY AND SUPPORT INFORMATION
See the warranty and support information included with this product.
For the latest information, go to www.hp.com/networking/support.
HP 8 / 10.7 dBi Dual-Band Narrow Beamwidth 3-Element MIMO
Sector Antenna (J9169A) Guide
© Copyright 2011, Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Printed in Malaysia
May 2011
Part Number: 5998-0859
GROUNDING : System grounding and lightning protection are
essential, especially for exterior-mounted antennas exposed to the
elements. Never install an antenna where it may fall and contact
electrical lines.
*5998-0859*
J9169A
Port 1 (Blue)
Port 3 (Green)
Port 2 (Red)