HP Antenna Power-level Setting Guide for MSM APs 2010-04
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
HP Antenna Power-level Setting Guide
Caution This document provides mandatory radio power-level settings that must be
configured to ensure that your device complies with regulatory requirements in
your region.
This document applies to you if you use any of these optional HP antennas with HP MSM
access points:
J8441A: 4.4 dBi 2.4GHz indoor/outdoor omnidirectional antenna,
J8444A: 7.4 dBi 2.4GHz outdoor omnidirectional antenna,
J8997A: 3/4 dBi indoor dual band diversity antenna,
J8999A: 6.9/7.7 dBi indoor/outdoor dual band directional antenna.
Guides for these antennas are available online at: www.hp.com/go/procurve/manuals. Under
HP ProCurve MultiService Mobility (MSM) Wireless Products select MSM3xx4xx
Antenna and Power-Level Information.
These four antennas may be used with MSM access points as follows:
Y = Yes, this antenna works with this access point in the indicated frequency band.
AP
Freq.
Band
Antenna
J8441A J8444A J8997A J8999A
MSM310 2.4 Y Y Y Y
5YY
MSM310-R 2.4 Y Y Y Y
5YY
MSM320-R 2.4 Y Y Y Y
5YY
MSM320 2.4 Y Y Y Y
5YY
MSM335 2.4 Y Y Y Y
5YY
MSM422 radio 2 2.4 Y Y Y Y
5YY
MSM422 radio 1 2.4
5