ProCurve 3/4dBi Dual Band Diversity Antenna (J8997A) Guide 2010-02

F
F
HP ProCurve Networking 2 HP ProCurve 3/4dBi Dual Band Diversity Antenna (J8997A) Guide
INSTALLATION
T-bar clips are provided on the rear panel of the antenna package.
Make two small slots in the tile to pass the feedlines, then install the
antenna onto the T-bar, as shown in Figure 1. For recessed-edge tiles,
use the supplied recessed tile adapter clips. Snap clips onto the T-bar,
then mount the antenna to the clips, as illustrated in Figure 2.
Clip
T-bar
Clip Clip