3Com Switch 8800 Family Configuration Guide

824 CHAPTER 71: INFORMATION CENTER
module-based filtering settings and severity threshold. When a user modifies these
settings, it will be reflected on other clients.
n
If you want to view the debugging information of some modules on the switch,
you must select debugging as the information type when configuring
information source, meantime using the debugging command to turn on the
debugging switch of those modules.
You can use the following commands to configure log information, debugging
information and the time-stamp output format of trap information.
This configuration will affect the timestamp of the displayed information.
Perform the following configuration in system view:
4 Enabling terminal display function
To view the output information at the Telnet terminal or dumb terminal, you must
first enable the terminal display function, and then the corresponding terminal
display function of log information on the switch.
For example, if you have specified the log information as the information sent to
the Telnet terminal or dumb terminal, now you need to use the terminal monitor
command to enable the terminal display function and the terminal logging
command to enable the terminal display function of log information on the
switch, then you can view the information at the Telnet terminal or dumb
terminal.
Perform the following configuration in user view:
Tabl e 782 Configure the output format of time-stamp
Operation Command
Configure the output format of the
time-stamp
info-center timestamp { log | trap |
debugging } { boot | date | none }
Output time-stamp is disabled
undo info-center timestamp { log | trap |
debugging }
Tabl e 783 Enable terminal display function
Operation Command
Enable terminal display function of log,
debugging and trap information
terminal monitor
Disable terminal display function of the above
information
undo terminal monitor
Enable terminal display function of debugging
information
terminal debugging
Disable terminal display function of
debugging information
undo terminal debugging
Enable terminal display function of log
information
terminal logging
Disable terminal display function of log
information
undo terminal logging