H3C S7500 Series Ethernet Switches Command Manual

Command Manual – RRPP
H3C S7500 Series Ethernet Switches Chapter 1
RRPP Configuration Commands
1-5
Ring State : -
Is Enabled : No Is Activated : No
Primary port : - Port status: -
Secondary port: - Port status: -
# Display the details of primary ring 10 in RRPP domain 1 (the current switch is the
transit node in ring 10).
<H3C> display rrpp verbose domain 1 ring 10
Domain Index : 1
Control VLAN : major 2003 sub 2004
Hello Timer : 1 sec Fail Timer : 3 sec
RRPP Ring : 10
Ring Level : 0
Node Mode : Transit
Ring State : -
Is Enabled : No Is Activated : No
Primary port : - Port status: -
Secondary port: - Port status: -
# Display the details of secondary ring 20 in RRPP domain 1 (the current switch is the
transit node in secondary ring 20).
<H3C> display rrpp verbose domain 1 ring 20
Domain Index : 1
Control VLAN : major 2003 sub 2004
Hello Timer : 1 sec Fail Timer : 3 sec
RRPP Ring : 20
Ring Level : 1
Node Mode : Transit
Ring State : -
Is Enabled : No Is Activated : No
Primary port : - Port status: -
Secondary port: - Port status: -
# Display the details of secondary ring 20 in RRPP domain 1 (the current switch is the
edge node in secondary ring 20).
<H3C> display rrpp verbose domain 1 ring 20
Domain Index : 1
Control VLAN : major 2003 sub 2004
Hello Timer : 1 sec Fail Timer : 3 sec
RRPP Ring : 20
Ring Level : 1
Node Mode : Edge
Ring State : -
Is Enabled : No Is Activated : No