H3C S7500E Series Ethernet Switches Installation Manual

Installation Manual
H3C S7500E Series Ethernet Switches Chapter 1 Product Overview
1-48
II. Technial specifications
Table 1-73 Technical specifications of the LSQ1SR12GB0
Item Specifications
CPU
Dual CPUs:
z MIPS64, 600 MHz
z MIPS64, 400 MHz
Boot ROM 512 KB
Flash memory 64 MB
DDR SDRAM 512 MB
Dimensions (H x W x D) 45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)
Interfaces
z One CF card slot
z Twelve 1000Base-X-SFP/100Base-FX-SFP ports
z One console port, used for local or remote
configuration and management of the switch through
a dialup connection
z One 10/100Base-TX management Ethernet port
Power consumption 42 W to 60 W
III. Panel and LEDs
Figure 1-25 shows the front panel of the LSQ1SR12GB0.
（1）
(3)
（4） （5）（6） （7）（2）
(8)
(1) CF card slot and CF card status LED (2) Gigabit/100 Mbps Ethernet ports and LEDs
(3) Console port
(4) 10/100Base-TX Ethernet port for
management and LEDs
(5) Power and fan tray status LEDs (6) LPU status LEDs
(7) ACTIVE LED of LSQ1SR12GB0 (8) RESET button
Figure 1-25 Front panel of the LSQ1SR12GB0
IV. On-board interfaces
z CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you
can store host software and logs, and thus upgrade software conveniently. The CF card
is hot swappable.
Table 1-74 describes the CFS LED on the right of the CF card.