HP 10500 Switch Series - HP 10500-CMW710-R2105-B Release Notes

In this example, when the file transfer is complete, the system sets the file as the main Comware

software image. The following is the sample output:

Loading...................................................................

..........................................................................

..................................Done!

77979456 bytes downloaded!

Updating File flash:/test.bin..............................................

..........................................................................

...............................................

..Done!

7. Enter 0 in the Serial submenu to return to the EXTEND-BOOTWARE menu.

8. Enter 1 in the EXTEND-BOOTWARE menu to run the new Comware software.

Upgrading Comware software through an Ethernet port

You can upgrade Comware software with FTP or TFTP through an Ethernet port from the Ethernet

submenu.

To update Comware software through an Ethernet port from the Ethernet submenu:

1. Enter 3 in the EXTEND-BOOTWARE menu to access the Ethernet submenu.

Enter your choice(0-9):3

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

|<Ensure The Parameter Be Modified Before Downloading!> |

============================================================================

Enter your choice(0-4):

Table 17 Ethernet submenu options

Option

Tasks

<1> Download Image Program To SDRAM And

Run

Load and run a Comware software image in SDRAM.

If password recovery capability is disabled, this option is

not available.

<2> Update Main Image File

Download a Comware software image to the current

storage medium as the main image (the file attribute is set to

M).

If a main system image already exists, the M file attribute of

the original image is removed.