HP 10500 Switch Series - HP 10500-CMW710-R2105-B Release Notes

5. Check the HyperTerminal output for errors. The following shows some possible errors.

 You have selected a baud rate other than 9600 bps, but did not set to the corresponding baud rate

on HyperTerminal.

 You typed an incorrect TFTP server IP address, filename, or directory.

 You typed an incorrect FTP server IP address, filename, file directory, FTP username, or password.

6. Verify that FTP or TFTP server software is running and has correct settings.

7. Verify that the flash has enough memory to store the downloaded files.

8. Verify that the versions of Comware software and BootWare are correct. For the compatibility

between the Comware software and BootWare, see the hardware and software compatibility

matrix in Release Notes.

9. Verify that the BootWare image is applicable to the target cards.

10. If a message “Something is wrong with the file” appears, check that the file is usable.