HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes
21
FTP User Password :PWD
Table 10 Setting FTP file transfer parameters
Field
Description
'.' = Clear field
Press the dot (.), and then press Enter to clear the setting for a field.
'-' = Go to previous field
Press the hyphen (-), and then press Enter to return to the previous field.
Ctrl+D = Quit
Press Ctrl + D to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file in the current storage medium on the
device. The target file name must have the same suffix as the source
file.
By default, the target file name is the same as the source file name.
Server IP Address
Set the IP address of the FTP server. If a mask must be set, use a colon
(:) to separate the mask length from the IP address. For example,
192.168.2.26:24.
Local IP Address
Set the IP address of the device.
Subnet Mask
Set the IP subnet mask of the device.
Gateway IP Address
Set a gateway IP address if the device is on a different network than
the server.
FTP User Name
Set the username for accessing the FTP server. This username must be
the same as the one configured on the FTP server.
FTP User Password
Set the password for accessing the FTP server. This password must be
the same as the one configured on the FTP server.
After you finish setting FTP parameters, the system returns to the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==================== ======
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-4):
7. Enter 2 or 3 as needed. For example, to upgrade the main Comware software images, enter 2.
Loading.....................................................................
............................................................................
.........................Done!
31911744 bytes downloaded!
Image file BOOT.bin is self-decompressing... Saving file flash:/
BOOT.bin ..............................................Done.
Image file SYSTEM.bin is self-decompressing...Saving file flash:/
SYSTEM.bin .................................. ..Done.
==========================<Enter Ethernet SubMenu>== ========================