HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes

41
Tasks
Reference
Skip console login authentication.
This option is available only if
password recovery capability is
enabled.
Skipping console login
authentication
Set the storage medium from which
the device will start up.
Set the storage medium where file
operations are performed. This
storage medium is referred to as the
"current storage medium" in this
chapter.
Managing storage media
Reboot the device.
N/A
Disabling password recovery capability
Password recovery capability controls console user access to the device configuration and SDRAM from
BootWare menus.
If password recovery capability is enabled, console users can do the following:
If console users forget their user privilege level passwords, they can skip the current configuration
file to configure new passwords.
If console users forget their console login passwords, they can skip login authentication or the
current configuration file to configure new passwords.
If password recovery capability is disabled, console users must restore the factory-default configuration
before they can configure new passwords. Restoring the factory-default configuration deletes the
next-startup configuration files.
To enhance system security, disable password recovery capability.
To disable password recovery capability:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Disable password recovery
capability.
undo password-recovery enable
Enabled by default.
NOTE:
To avoid version compatibility problems, use compatible Comware software and BootWare.
Running the Comware software
To run the Comware software after completing all operations, enter 1 in the EXTEND-BOOTWARE menu.
Enter your choice(0-9): 1
Loading file flash:/10500-CMW710-SYSTEM-A0035P16.bin.......................
............................................................................
............................................................................