HP 10500 Switch Series - HP 10500-CMW710-R2105P05 Release Notes

49
============================================================================
2. Enter the number of the file you are working with.
Enter file No.:1
Modify the file attribute:
============================================================================
|<1>+Main
|<2>+Backup |
|<0> Exit |
============================================================================
Enter your choice(0-2):
Modify the file attribute:
============================================================================
|<1>+Main |
|<2>+Backup |
|<0> Exit |
==================================================== ========================
3. Enter a number in the range of 1 to 4 to add or delete a file attribute for the file. For example, enter
1 to set the file as the main image file.
Enter your choice(0-2):1
This operation may take several minutes. Please wait... .
Image file 10500-CMW710-BOOT-E2102.bin is self-decompressing...
Saving file flash:/ 10500-CMW710-BOOT-E2102.bin .........................
.................................................Done.
Image file 10500-CMW710-SYSTEM-E2102.bin is self-decompressing...
Saving file flash:/ 10500-CMW710-SYSTEM-E2102.bin .......................
............................................................................
............................................................................
............................................................................
.................................... ......Done.
Set the file attribute success!
Changing the .bin Comware software image type
To change the type of a .bin Comware software image, enter 3 in the FILE CONTROL submenu:
Enter your choice(0-4): 3
'M' = MAIN 'B' = BACKUP 'N/A' = NOT ASSIGNED
==================================================================
|NO. Size(B) Time Type Name |
|1 100766720 Mar/21/2013 11:31:45 N/A flash:/boot.bin |
|2 17853440 Mar/21/2013 11:03:11 N/A flash:/ sys.bin |
============================================================================ ===
Note:Select .bin files. One but only one boot image and system image must
be included.
Enter file No.(Allows multiple selection): 1
Enter another file No.(0-Finish choice):2