HP 12500 Switch Series - 12500-CMW710-R7128 Release Notes

<Sysname> dir

Directory of cfa0:

0 drw- - Sep 15 2012 14:32:26 diagfile

1 drw- - Sep 15 2012 14:32:26 logfile

2 -rw- 37137408 Sep 15 2012 14:26:38 main-boot.bin

3 -rw- 62894080 Sep 15 2012 14:27:06 main-system.bin

4 -rw- 1694 Sep 15 2012 14:47:12 startup.cfg

1021808 KB total (864868 KB free)

3. Use the ftp command in user view to access the FTP server.

<Sysname> ftp 192.168.1.1

Connected to 192.168.1.1 (192.168.1.1).

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User (192.168.1.1:(none)): 1

331 Give me your password, please

Password:

230 Logged in successfully

Remote system type is MSDOS.

ftp>

4. Use the put command in FTP client view to upload the current images to the FTP server.

ftp> bin

200 Type is Image (Binary)

ftp> put main-boot.bin

227 Entering Passive Mode (192,168,1,1,8,237)

150 "D:\test\main_boot.bin" file ready to receive in IMAGE / Binary mode

226 Transfer finished successfully.

37137408 bytes sent in 16.706 seconds (2.12 Mbyte/s)

ftp> put main-system.bin

227 Entering Passive Mode (192,168,1,1,8,237)

150 "D:\test\main_system.bin" file ready to receive in IMAGE / Binary mode

226 Transfer finished successfully.

62894080 bytes sent in 28.293 seconds (2.12 Mbyte/s)

5. Use the put command in FTP client view to upload the startup .cfg file to the FTP server.

ftp> put startup.cfg

227 Entering passive mode (192,168,1,1,8,237)

150 "D:\test\startup.cfg" file ready to receive in ASCII mode

226 Transfer finished successfully.

1694 bytes sent in 0.001 seconds (2.12 Mbyte/s)

ftp>

Upgrading the system software

1. Use the get command in FTP client view to download the software upgrade file update.ipe to the

CF card on the switch.

ftp> get update.ipe

227 Entering Passive Mode (192,168,1,1,8,238)

150 "D:\test\update.ipe" file ready to send (98780160 bytes) in IMAGE / Binary mode