HP 12500 Switch Series - 12500-CMW710-R7128 Release Notes

33
Figure 8 File transfer progress
When the download is complete, the following information appears:
Download successfully!
31911808 bytes downloaded!
Input the File Name:update.ipe
Updating File cfa0:/update.ipe..............................................
.....................................................Done!
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Update User Private File |
|<6> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-6):
13. Enter 0 to return to the BooWare menu, and then enter 1 to reboot the system.
14. If the baud rate of the HyperTerminal is not 9600 bps, restore it to 9600 bps. If the baud rate is
9600 bps, skip this step.
Handling software upgrade failures
If a software upgrade fails, the system runs the old software version.
To handle a software upgrade failure: