HP 7500 Switch Series - HP A7500-CMW520-R6626P02 Release Notes

HP A7500-CMW520-R6626P02 Release Notes
Hewlett-Packard Development Company, L.P.
24
125 BINARY mode data connection already open, transfer starting for /newest.app
226 Transfer complete.
FTP: 28945856 byte(s) received in 35.974 second(s), 896.00K byte(s)/sec.
[ftp] bye
221 Server closing.
3. Copy the .app file to the standby MPU of the switch.
# Copy the file newest.app to the root directory of the storage medium on the standby MPU in slot 1.
<Sysname> copy newest.app slot1#flash:/
Copy flash:/newest.app to slot1#flash:/newest.app?[Y/N]:y
%Copy file flash:/newest.app to slot1#flash:/newest.app...Done.
NOTE:
 You can configure the switch as the FTP server, FTP client, or TFTP client. The transfer processes slightly
vary. For more information about FTP and TFTP, see the Fundamentals Configuration Guide in the HP
A7500 Switch Series Configuration Guides.
 You can use the transfer procedure described in this section to transfer Boot ROM images, system
software images, and patch files for upgrade from the CLI.
Upgrade software from the CLI
CAUTION:
Make sure that the .app file exists in the root directory of the storage medium of the active MPU and the
standby MPU.
Perform the following tasks as needed:
 Upgrade Boot ROM
 Upgrade system software
 Install patches
1. Upgrade Boot ROM
# Upgrade the Boot ROM for the active MPU in slot 0.
<Sysname> bootrom update file flash:/newest.app slot 0
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in slot 0.
# Upgrade the Boot ROM for the standby MPU in slot 1.
<Sysname> bootrom update file slot1#flash:/newest.app slot 1
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in slot 1.