HP 7500 Switch Series - HP A7500-CMW520-R6635 Release Notes

HP A7500-CMW520-R6635 Release Notes
Hewlett-Packard Development Company, L.P.
38
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Step4 In the Boot ROM update menu, type 2 to set the FTP parameters:
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):2
Load File name : newest.app The name of the target .app file
Switch IP address : 10.10.10.2 The IP address of the sw itch
Server IP address : 10.10.10.3 The IP address of the PC that stores the .app file
FTP User Name :username The FTP username
FTP User Password :12345 The passw ord
NOTE:
The switch must be on the same network segment as the PC storing the upgrade files.
Step5 After you set the FTP parameters and press Enter, the switch starts to download the upgrade file. When
the file is successfully downloaded, the following information appears:
Loading...........done!
Will you Update Basic BootRom? (Y/N):
Step6 Answer Y to the question. The following information appears:
Will you Update Basic BootRom? (Y/N):Y
Updating Basic BootRom..........done!
Updating extended BootRom? (Y/N):
Step7 Answer Y to the question. The following information appears:
Updating extended BootRom? (Y/N):Y
Updating extended BootRom...........done!
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters