HP 7500 Switch Series - HP A7500-CMW520-R6635 Release Notes

HP A7500-CMW520-R6635 Release Notes
Hewlett-Packard Development Company, L.P.
7
LPU 3:
Uptime is 0 weeks,0 days,8 hours,18 minutes
HP A7503 LPU with 1 BCM1122 Processor
BOARD TYPE: LSQ1GV48SC
DRAM: 512M bytes
FLASH: 0M bytes
NVRAM: 0K bytes
PCB 1 Version: VER.C
Bootrom Version: 301 ------Note②
CPLD 1 Version: 003
Release Version: HP A7503-6635
Patch Version : None
Restrictions and cautions
1. SFP+ Direct Attach Cables are not recommended for use as IRF connections because failover and
recovery times are extended when this form of copper connection is use. Optical IRF connections
are recommended to optimize IRF failure, recovery and convergence times.
2. It takes more than half an hour to collect diagnostic information when the IRF has many
configuration parameters.
3. The hp 7500 product family supports four IRF members in R6635. There are several setup and
configuration limitation, please check the Command Line Manual and Operation Manual of
R6635 for detail.
Feature list
Hardware features
Table 4 A7500 series hardware features
Item
Specification
Dimensions (H × W ×
D)
(excluding feet and
rack-mounting
brackets)
HP A7502:
175 x 436 x 420 mm (6.89 x 17.17 x 16.54 in.)
HP A7503-S:
175 x 436 x 420 mm (6.89 x 17.17 x 16.54 in.)
HP A7503:
441.7 x 436 x 420mm (17.39 x 17.17 x 16.54 in.)
HP A7506:
575.05 x436 x 420mm (22.64 x 17.17 x 16.54 in.)
HP A7506-V:
930.6 x 436 x 420mm (36.64 x 17.17 x 16.54 in.))