HP 7500/E7900 Switch Series - HP 7500-CMW520-R6708P03 Release Notes

LSD62435

 Symptom: A subinterface fails to forward traffic to another chassis.

 Condition: If the VLAN ID of subinterface is identical with the MAD VLAN ID.

 Workaround: Do not configure the same VLAN ID for them.

List of resolved problems

Resolved problems in R6708P03

LSD074280

 Symptom: The switch does not record error information generated in slot 0.

 Condition: This symptom can be seen after slot 0 generates error information.

LSD074473

 Symptom: In an MPLS network with many devices, LDP might go down due to LDP packet processing

errors.

 Condition: This symptom might occur in an MPLS network with many devices.

LSD074999

 Symptom: When a 40G QSFP LR4 fiber module is inserted to a port that is not the first port, the port

cannot correctly identify the fiber module.

 Condition: This symptom occurs when a 40G QSFP LR4 fiber module is inserted to a port that is not

the first port.

LSD074984

 Symptom: The master board experiences unexpected reboot or hung because of fatal error.

 Condition: When system receives DHCP packet which contains abnormal option 82 field.

Resolved problems in R6708

LSD073765

 Symptom: If the OSPF LSDB has multiple Type 5 LSAs that describe default routes, the system

prompts an error syslog "The default route has been changed or deleted, protocol is OSPF" during

OSPF route calculation.

 Condition: This symptom occurs if the OSPF LSDB has multiple Type 5 LSAs that describe default

routes.

LSD073419

 Symptom: When many ARP and MAC moves occur on ports or VPNs, ARP might occupy the CPU

for a long time, and do not answer ARP requests.

 Condition: This symptom might be seen when many ARP and MAC moves occur on ports or VPNs.

LSD074037

 Symptom: PBR fails to work when a packet matches two entries in the PBR policy.