Manualshelf

HP 7500/E7900 Switch Series - HP 7500-CMW520-R6708P03 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8108fl Redundant Switch Fabric Module
41424344454647484950
38
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Step8 Type 0 to return to the boot menu.
BOOT MENU
1: Download application file to device
2: Select application file to boot
3: Display all files in device
4: Delete file from device
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):0
Step9 Type 0 to reboot the switch.
NOTE:
The Boot ROM upgrade takes effect at the next startup.
Using Xmodem through the console port
Step1 Connect the console port of the switch to the PC that stores the upgrade files.
Step2 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Accessing the
Boot ROM menu for more information), and press Ctrl+U when you see "Enter your choice(0 -5):" to enter
the Boot ROM update menu.
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):
Step3 In the Boot ROM update menu, type 3 to set the Xmodem parameters:
BootRom update menu:
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
4. Update through file in device
0. Return to boot menu
Enter your choice(0-4):3