HP 7500/E7900 Switch Series - HP 7500-CMW520-R6708P03 Release Notes

46
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):0
Step7 Type 0 to return to the boot menu.
After the .app file is successfully downloaded, set the file as the main or backup system software image.
For more information, see Set new main and backup system software images.
3. Using Xmodem through the console port
Step1 Connect the console port of the switch to the PC that stores the target .app file.
Step2 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Accessing the
Boot ROM menu for more information), and type 1 when you see "Enter your choice(0 -5):" to enter the
download protocol menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password
0. Reboot
Enter your choice(0-5):1
Step3 In the download protocol menu, type 3. The switch asks you to provide the name of the file you want to
download.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3): 3
Load File name :update.app The name of the file to be dow nloaded
Step4 Type the file name and the download baud rate menu appears.
Please select your download baudrate:
1.*9600
2. 19200
3. 38400