HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

<Sysname> bootrom update file slot16#flash:/12900-CMW710-BOOT-R1106.bin slot 16

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating the Boot ROM, please wait........... ...........Done

# Upgrade the BootWare on the LPU in slot 9. (Upgrade other LPUs in the same way.)

<Sysname> bootrom update file flash:/12900-CMW710-BOOT-R1106.bin slot 9

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating the Boot ROM, please wait........... ...........Done

# Upgrade the BootWare of the switching fabric module in slot 10.

<Sysname> bootrom update file flash:/12900-CMW710-BOOT-R1106.bin slot 10

This command will update bootrom file on the specified board(s),

Continue? [Y/N]:y

Now updating the Boot ROM, please wait........... ...........Done

# Reboot the switch to complete the upgrade.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

2. Upgrade Comware software:

# Specify the images as the main startup software images for the active MPU.

<Sysname> boot-loader file boot flash:/12900-CMW710-BOOT-R1106system

flash:/12900-CMW710-SYSTEM-R1106.bin slot 17 main

This command will set the main startup software images. Continue? [Y/N]:y

The images that have passed all examinations will be used as the main startup software

images at the next reboot on slot 17

# Specify the images as the main startup software images for the standby MPU.

<Sysname> boot-loader file boot flash:/12900-CMW710-BOOT-R1106system

flash:/12900-CMW710-SYSTEM-R1106.bin slot 16 main

This command will set the main startup software images. Continue? [Y/N]:y

Successfully copied flash:/12900-CMW710-BOOT-R1106to slot16#flash:/

12900-CMW710-BOOT-R1106.

Successfully copied flash:/12900-CMW710-SYSTEM-R1106.bin to slot16#flash:/

12900-CMW710-SYSTEM-R1106.bin.

The images that have passed all examinations will be used as the main startup software

images at the next reboot on slot 16

For more information about the boot-loader command, see HP FlexFabric 12900 Switch Series

Fundamentals Command Reference.

# To prevent configuration loss at reboot, save the running configuration.

<Sysname> save

# Reboot the switch to complete the upgrade.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...