HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

# Specify the images as the main startup software images for the standby MPUs:

 On the standby MPU in slot 16 of member device 1:

<Sysname> boot-loader file boot flash:/12900-CMW710-BOOT-R1106system

flash:/12900-CMW710-SYSTEM-R1106.bin chassis 1 slot 16 main

This command will set the main startup software images. Continue? [Y/N]:y

Successfully copied flash:/12900-CMW710-BOOT-R1106to chassis1#slot16#flash:

/ 12900-CMW710-BOOT-R1106.

Successfully copied flash:/12900-CMW710-SYSTEM-R1106.bin to chassis1#slot16#flas

h:/ 12900-CMW710-SYSTEM-R1106.bin.

The images that have passed all examinations will be used as the main startup

software images at the next reboot on chassis 1 slot 16.

 On the standby MPU in slot 17 of member device 2:

<Sysname> boot-loader file boot flash:/12900-CMW710-BOOT-R1106system

flash:/12900-CMW710-SYSTEM-R1106.bin chassis 2 slot 17 main

This command will set the main startup software images. Continue? [Y/N]:y

Successfully copied flash:/12900-CMW710-BOOT-R1106to chassis2#slot17#flash:

/ 12900-CMW710-BOOT-R1106.

Successfully copied flash:/12900-CMW710-SYSTEM-R1106.bin to chassis2#slot17#flas

h:/ 12900-CMW710-SYSTEM-R1106.bin.

The images that have passed all examinations will be used as the main startup

software images at the next reboot on chassis 2 slot 17.

 On the standby MPU in slot 16 of member device 2:

<Sysname> boot-loader file boot flash:/12900-CMW710-BOOT-R1106system

flash:/12900-CMW710-SYSTEM-R1106.bin chassis 2 slot 16 main

This command will set the main startup software images. Continue? [Y/N]:y

Successfully copied flash:/12900-CMW710-BOOT-R1106to chassis2#slot16#flash:

/12900-CMW710-BOOT-R1106.

Successfully copied flash:/12900-CMW710-SYSTEM-R1106.bin to

chassis2#slot16#flash:/12900-CMW710-SYSTEM-R1106.bin.

The images that have passed all examinations will be used as the main startup

software images at the next reboot on chassis 2 slot 16.

For more information about the boot-loader command, see HP FlexFabric 12900 Switch Series

Fundamentals Command Reference.

# To prevent configuration loss at reboot, save the running configuration.

<Sysname> save

# Reboot the IRF fabric to complete the upgrade.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

3. Install a patch package:

IMPORTANT:

Use the display install active command to verify whether patches have been installed on the device.

If the device has patches, uninstall them. Only one patch package file can be installed on the device.

# Install the patch package 12900-CMW710-SYSTEM-E2102H08.bin on the global active MPU.