HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

20
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
5. Enter 4 in the serial submenu to change the baud rate of the console port.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):2
6. Enter an appropriate baud rate option. For example, enter 2 to select 19200 bps.
Baudrate has been changed to 19200 bps.
Please change the terminal's baudrate to 19200 bps, press ENTER when ready.
NOTE:
If you select 9600 bps, directly go to Step 11.
7. Select Call/Disconnect from the HyperTerminal window to disconnect the HyperTerminal from the
switch.
Figure 1 Disconnecting the terminal
8. Select File > Properties in the HyperTerminal window, click Configure in the popup dialog box,
and select the baud rate of 19200 bps in the console port properties dialog box.