HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

22
9. Select Call/Call to reconnect to the switch.
Figure 4 Connecting to the switch
10. Press Enter in the BootWare interface.
The current baudrate is 19200 bps
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default) |
|<2> 19200* |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):
11. Enter 0 to return to the Serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
12. Enter 2 or 3 as needed. For example, enter 2 to update the main startup software image.
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
13. Select Transfer > Send File in the HyperTerminal window. In the Send File dialog box that appears,
click Browse to select the source file, and select Xmodem as the protocol.