HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

34
Shortcut
key
Prompt message
Function
Ctrl+C
Please Start To Transfer File, Press <Ctrl+C> To
Exit
Stops the ongoing file transfer and exits the
current operation interface.
Info: Press Ctrl+C to abort or return to
EXTENDED ASSISTANT MENU
Returns to the EXTENDED ASSISTANT menu. If
the system is outputting the result of an
operation, this shortcut key combination aborts
the display first.
Ctrl+D
Press Ctrl+D to access BASIC-BOOTWARE
MENU
Accesses the BASIC-BOOTWARE menu.
Ctrl+D = Quit
Exits the parameter settings menu.
Ctrl+E
Memory Test(press Ctrl+C to skip it,press
Ctrl+E to ECHO INFO)
Displays the test process.
Ctrl+F
Ctrl+F: Format File System
Formats the current storage medium.
Ctrl+T
Press Ctrl+T to start memory test
Starts a RAM test before the extended
BootWare segment starts to run.
Ctrl+U
Access BASIC ASSISTANT MENU
Accesses the BASIC ASSISTANT menu from
the BASIC-BOOTWARE menu.
Ctrl+V
Press Ctrl+V to start heavy memory test
Performs a memory pressure test.
Ctrl+Z
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Accesses the EXTENDED ASSISTANT menu
from the EXTENDED-BOOTWARE menu.
Using the BASIC-BOOTWARE menu
To access the BASIC-BOOTWARE menu:
1. Power on the device.
2. Press Ctrl + D within 4 seconds after the "Press Ctrl+D to access BASIC-BOOTWARE MENU"
prompt message appears. If you fail to do this within the time limit, the system starts to run the
extended BootWare segment.
======================<BASIC-BOOTWARE MENU(Ver 1.19)>=======================
|<1> Modify Serial Interface Parameter |
|<2> Update Extended BootWare |
|<3> Update Full BootWare |
|<4> Boot Extended BootWare |
|<5> Boot Backup Extended BootWare |
|<0> Reboot |
============================================================================
Ctrl+U: Access BASIC ASSISTANT MENU
Enter your choice(0-5):