HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

43
Table 18 Setting file transfer parameters
Field
Description
'.' = Clear field
Press the dot (.), and then press Enter to clear the setting for a field.
'-' = Go to previous field
Press the hyphen (-), and then press Enter to return to the previous
field.
Ctrl+D = Quit
Press Ctrl + D to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP or TFTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file in the current storage medium on
the device. The target file name must have the same suffix as the
source file.
By default, the target file name is the same as the source file name.
Server IP Address
Set the IP address of the FTP or TFTP server. If a mask must be set,
use a colon (:) to separate the mask length from the IP address. For
example, 192.168.2.26:24.
Local IP Address
Set the IP address of the device.
Subnet Mask
Set the IP subnet mask of the device.
Gateway IP Address
Set a gateway IP address if the device is on a different network
than the server.
FTP User Name
Set the username for accessing the FTP server. This username must
be the same as the one configured on the FTP server. This field is
not available for TFTP.
FTP User Password
Set the password for accessing the FTP server. This password must
be the same as the one configured on the FTP server. This field is
not available for TFTP.
Managing files
To change the type of a Comware software image, retrieve files, or delete files, enter 4 in the
EXTENDED-BOOTWARE menu.
Enter your choice(0-9):4
The following FILE CONTROL submenu appears:
===============================<File CONTROL>===============================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Image File type |
|<3> Set Bin File type |
|<4> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):