HP FlexFabric 12900 Switch Series - 12900_7.1.R1106-B_Release-Notes-Portfolio

1
MIB updates
Table 5 MIB updates
Item
MIB file
Module
Description
12900-CMW710-R1106
New
None
None
None
Modified
None
None
None
Operation changes
None.
Restrictions and cautions
 The software version does not support EA, EB or EC line card, and EA, EB or EC line card should
use 12900 10xx series software version.
 An IRF fabric takes more than 10 minutes to complete diag information collection if it has a large
configuration file.
 Layer 3 interfaces do not support multicast functions.
 BFD does not support multi-chassis link aggregation.
Open problems and workarounds
LSV7D008734
 Symptom: After a QSFP+ port is connected to a 3-meter cable, the peer port goes up and down,
and then goes up.
 Condition: This symptom can be seen after a QSFP+ port is connected to a 3-meter cable.
 Workaround: Execute the shutdown command on the QSFP+ port before connecting the 3-meter
cable, and execute the undo shutdown command on the QSFP+ port after connecting the cable.
LSV7D004550
 Symptom: When the ip redirects enable command is configured, traffic among Layer 3 Ethernet
interfaces is forwarded by the CPU.
 Condition: This symptom occurs when the ip redirects enable command is configured.
 Workaround: Do not configure the ip redirects enable command when Layer 3 Ethernet interfaces
exist.