Release Notes - H3C S7500E-CMW520-R6616P05

H3C S7500E-CMW520-R6616P05 Release Notes

Hangzhou H3C Technologies Co., Ltd.

NOTE:

Skip this section if the new boot file already exists on your switch.

1. Using TFTP through the management Ethernet port

Step1 Connect the management Ethernet port of the switch to the PC that stores the target .app file (the IP

address of the PC is required), and connect the console port of the switch to the same or another PC.

Step2 Run the TFTP server program on the PC connected to the management Ethernet port and specify the file

storage directory.

Step3 Run the terminal emulation program on the PC connected to the console port. Start the switch, enter the

boot menu (see Boot Menu for more information), and type 1 when you see "Enter your choice(0-5):" to

enter the download protocol menu.

BOOT MENU

1. Download application file to device

2. Select application file to boot

3. Display all files in device

4. Delete file from device

5. Modify BootRom password

0. Reboot

Enter your choice(0-5):1

Step4 In the download protocol menu, type 1 to set the TFTP parameters.

1. Set TFTP protocol parameter

2. Set FTP protocol parameter

3. Set XMODEM protocol parameter

0. Return to boot menu

Enter your choice(0-3): 1

Load File name :newest.app The name of the target .app file

Switch IP address :10.10.10.2 The IP address of the sw itch

Server IP address :10.10.10.3 The IP address of the PC that stores the .app file

NOTE:

The switch must be on the same network segment with the PC storing the upgrade files.

Step5 Set the TFTP parameters. The following output appears:

Are you sure to download file to flash? Yes or No (Y/N):Y

Step6 Answer Y to the question. The switch starts to download the file and write it to the flash memory. When

the process is complete, you can see the following:

Loading........................................................................

...............................................................................

.......................................................................done!

Free space: 37584896 bytes

Writing flash..................................................................