Manualshelf

Release Notes - H3C S7500E-CMW520-R6616P05

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8108fl Redundant Switch Fabric Module
31323334353637383940
H3C S7500E-CMW520-R6616P05 Release Notes
34
NOTE:
The switch must be on the same network segment with the PC storing the upgrade files.
Step12 Set the FTP parameters. The following output appears:
Are you sure to download file to flash? Yes or No (Y/N): y
Step13 Answer Y to the question. The switch starts to download the file and write it to the flash memory. When
the process is complete, you can see the following:
Loading........................................................................
...............................................................................
...............................................................................
.......................................................................done!
Free space: 37584896 bytes
Writing flash..................................................................
...............................................................................
..........................done!
The attribute of old.app is changed from main to none!
done!
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):0
Step14 Type 0 to return to the boot menu.
After the .app file is successfully downloaded, set the file as the main or backup boot file. For more
information, see Set new main and backup boot files.
3. Using Xmodem through the console port
Step15 Connect the console port of the switch to the PC that stores the target .app file.
Step16 Run the terminal emulation program on the PC. Start the switch, enter the boot menu (see Boot Menu for
more information), and type 1 when you see "Enter your choice(0 -5):" to enter the download protocol
menu.
BOOT MENU
1. Download application file to device
2. Select application file to boot
3. Display all files in device
4. Delete file from device
5. Modify BootRom password
0. Reboot
Enter your choice(0-5):1
Step17 In the download protocol menu, type 3. The switch asks you to provide the name of the file you want to
download.
1. Set TFTP protocol parameters