3COM_OS_SW8800_V3.01.32rc13_Release_Notes

3COM OS SW8800 V3.01.32rc13 Release Notes
April 25, 2013 Page 20 of 56
Version number Item Description
Modified commands None
New commands None
Removed commands None
V3.01.32rc08
Modified commands None
V3.01.32rc07 New commands Command 1
Syntax:
delete-arp { probefailure | testcomplete } *
undo delete-arp { probefailure | testcomplete } *
View:
NQA view
Parameters:
probefailure: Delete ARP of the destination IP
address when the probe fails and the
corresponding filter condition is satisfied.
testcomplete: Delete ARP of the destination IP
address when the test fails and the corresponding
filter condition is satisfied.
Description:
Use the delete-arp command to configure the
conditions of deleting ARP of the destination IP
address.
Use the undo delete-arp command to cancel the
configured the conditions of deleting ARP of the
destination IP address.
By default, no deleting ARP of the destination IP
address.
Example:
# Configure the condition of deleting ARP of the
destination IP address as probefailure.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] nqa-agent enable
[Sysname] nqa administrator icmp
[Sysname-nqa-administrator-icmp] delete-arp
probefailure
Command 2
Syntax:
ipc-path check { enable | disable }
View: