3COM_OS_SW8800_V3.01.32rc13_Release_Notes

3COM OS SW8800 V3.01.32rc13 Release Notes
April 25, 2013 Page 36 of 56
Description:
The SW8800 device will reboot probability.
HYII07640
First Found-in Version: V3.01.32rc06
Condition:
This problem occurs when to display loopback-detection on the SW8800 device.
Description:
The loopback-detection information only includes the detected port without the VLAN.
HYII07650
First Found-in Version: V3.01.32rc06
Condition:
This problem occurs when some key registers of the board were wrong.
Description:
The register wrong information only records in the logbuffer without saving in the NVRAM.
HYII07647
First Found-in Version: V3.01.32rc06
Condition:
This problem occurs when we have configured BGP on the device.
Description:
Much "connect fail (error code -31)" information was printed on the slave board.
HYII07654
First Found-in Version: V3.01.32rc06
Condition:
This problem occurs when we have configured Level-2 ISIS on the device.
Description:
The SW8800 device can't identify the LSP packet with UP/Down bit set.
HYII07653
First Found-in Version: V3.01.32rc06
Condition: