3COM_OS_SW8800_V3.01.32s256rc13_Release_Notes

3COM OS SW8800 V3.01.32s256rc13 Release Notes
April 25, 2013 Page 30 of 56
Description:
Delete OSPF configuration and then re-configure, this will result in rebooting exceptionally.
HYII07776
First Found-in Version: V3.01.32s256rc08
Condition:
The SW8800 device has establish OSPF neighbors with peer which configure network large segment.
Description:
It will result in SW8800 device rebooting exceptionally.
Resolved Problems in V3.01.32s256rc08
HYII07731
First Found-in Version: V3.01.32s256rc07
Condition:
This problem occurs when you display fiber-module information.
Description:
The TX Power of fiber-module information is wrong.
Resolved Problems in V3.01.32s256rc07
HYII07691
First Found-in Version: V3.01.32s256rc06
Condition:
This problem occurs when the 2.5G/1G fiber-module is used on the SW8800 device.
Description:
The transceiver type of 2.5G/1G fiber-module is displayed wrong.
HYII07695
First Found-in Version: V3.01.32s256rc06
Condition:
The SW8800 device needs to support NQA (Network Quality Analyzer) and ARP collaboration.
Description:
The current version does not support NQA and ARP collaboration.