3COM_OS_SW8800_V3.01.32s256rc13_Release_Notes

3COM OS SW8800 V3.01.32s256rc13 Release Notes
April 25, 2013 Page 31 of 56
HYII07676
First Found-in Version: V3.01.32s256rc06
Condition:
This problem occurs when the RPR network topology changed frequently.
Description:
The direct PING possibly failed between the RPR nodes.
HYII07677
First Found-in Version: V3.01.32s256rc06
Condition:
This problem occurs when the RPR physical port was DOWN/UP.
Description:
The RPR ring is opened and cannot recover with low probability.
HYII07686
First Found-in Version: V3.01.32s256rc06
Condition:
This problem occurs when the device was running the lay-2 multicast flow.
Description:
The multicast entry is wrong, and this will result in some lay-2 multicast flow failing.
HYII07690
First Found-in Version: V3.01.32s256rc06
Condition:
This problem occurs when the SW8800 VLL (Virtual Leased Line) was connected with the CISCO
VPLS.
Description:
The LDP session will establish repeatedly after receiving "VPLS MAC Address Withdraw" message.
HYII07697
First Found-in Version: V3.01.32s256rc06
Condition:
This problem occurs when the SW8800 device enable MPLS LDP and configure static LSP.